Access Beneath Access Floor Panels

When it is necessary to gain access to the space under an access floor it is important that only those panels directly over the area of work should be removed. To remove the first panel an appropriate lifting device must be used. The use of screwdrivers, pliers or other objects to pry or lift panels is not recommended and should be prohibited as the access floor may incur damage.

Click here for more Access Floor information!

To remove the panel, place the lifter in the corner of the panel and lift up vertically. Once the panel has been elevated above the plane of the bordering panels, remove the panel by hand. If panels next to this panel require removal, simply place a hand under those panels and lift out.

Types of Lifting Devices

Suction Cup Lifter - For use on bare panels with no floor covering and panels with a hard surface floor covering.

Claw Lifter - For use on panels with a cut pile carpet surface.

Velcro Carpet Lifter - For use on panels with a level loop carpet surface.

Special Precautions

Make sure the correct tools are utilised in order to remove and reinstall the floor panels, otherwise the floor may sustain damage.

When accessing the space underneath an access floor every precaution should be taken not to change the level adjustment of the support pedestals. It is also essential not to interrupt the shape and position of the stringers while the floor panels are out of the system.

When panels with factory laminated carpet are reinstalled, carpet shoes must be used to ensure that carpet pile is not trapped.

Always make a final check to see that panels are correctly in place, level and secure.

Fieldmans Access Floors Ltd has been successfully installing acess floors in the UK and abroad for 20 years. Quality and job satisfaction are always the highest priority. For more information, please call 0208 462 7100 or write to Enquiries@Fieldmans.com.