Removing and replacing access flooring

One of the advantages of access flooring is, as the name suggests, the fact you can access the systems and equipment stored beneath it. However, there are a number of things to bear in mind before you access the under-floor space.

Click here for more on our range of Access Flooring!

First of all, make sure you check the drawings that indicate the positions the panels and the structure and contents beneath them. Then, plan the most efficient way to get underneath the access flooring, by removing as few panels as possible. Make sure you remove the panels safely; you will need the correct panel lifting devices. You will need to make sure you don't remove panels by levering with screwdrivers etc.

It is a good idea to draw a diagram of the panel positions and maybe label them so you can put each panel back in the right place without much difficulty.

Before you replace any access flooring panels you should make sure the head caps are free of debris and that locating lugs are intact and square on the pedestal. You should also vacuum the sub-floor so the immediate working area is clean. Floor panels should be carefully lifted and replaced in their original orientation. Do not force access floor panels into position as damage could occur to the panel edge.

Let Fieldmans help you

If you need any help or advice about removing or replacing your access flooring, Fieldmans Access Floors Ltd is the company to call. As an independent company with over twenty years’ experience in the business, they know every aspect of access floor removal and replacement inside out. For more information, please call 0208 462 7100 or write to Enquiries@Fieldmans.com.